APC Network Management Cardの設定(シリアル接続)

付属のシリアルケーブル + USB-シリアル変換ケーブルでUPS(Network Management Card)を
設定しましたので、その備忘録を殴り書きしときます。
なお、APCで公開されているマニュアルはここの”ソフトウェア&アクセサリマニュアル“からダウンロードできます。

User Name/Password = apc/apc

1- Device Manager
  1- Smart-UPS
  2- Environment
2- Network
   1- TCP/IP
   1- Boot Mode : DHCP & BOOTP
     1- DHCP & BOOTP
     2- DHCP only
     3- BOOTP only
     4- Manual
   2- Advanced…
     1-HostName
     2-DomainName
     3-PortSpeed
     4-VendorClass
     5-ClientID
     6-UserClass
     7-AfterIPAssignment
     8-DHCPCookieIs
      9-AcceptChanges
   2- DNS
   1- Primary DNS Server IP
   2- Secondary DNS Server IP
   3- Reverse DNS Lookup
   4- Accept Changes
   3- Ping Utilit
   4- FTP Server
   5- Telnet/SSH
   1- Access
   2- Protocol Mode
   3- Telnet Port
   4- SSH Port
   5- Advanced SSH Configuration
   6- Accept Changes
   6- Web/SSL/TLS
   1- Access
   2- SSL/TLS
   3- HTTP Port
   4- HTTPS Port
   5- Advanced SSL/TLS Configuration
   6- Accept Changes
   7- Email
   8- SNMP
   9- Syslog
  10- WAP
   1- Access
   2- Accept Changes

3- System
  1- User Manager
    1- Administrator
    2- Device Manager User
    3- Auto Logout
    4- Accept Changes
  2- Identification
    1- Name
    2- Contact
    3- Location
    4- Accept Changes
  3- Date/Time
    1- Manual     
    2- Network Time Protocol (NTP)
       1- Primary NTP Server
       2- Secondary NTP Server
       3- GMT Offset (timezone)
       4- Update Frequency
       5- NTP Client
       6- Accept Changes
    3- Update Time Using NTP Now
    4- Date Format
    5- Daylight Saving Time (DST)
  4- Tools
  5- RADIUS
  6- Modem
  7- About System

4- Logout

■1. ネットワークの設定(IPアドレス/サブネットマスク/デフォルトゲートウェイ/ホストネーム等)([1- Device Manager]→[1- TCP/IP])

——- TCP/IP —————————————————————-

Network not started. Currently making a BOOTP request…
———————————————————————–
MAC Address : 00 00 00 00 00 00

1- Boot Mode : DHCP & BOOTP
2- Advanced…

– Back, – Refresh, – Event Log
>

#IPアドレス(DHCP,スタティックIPの選択)の設定は“1- Boot Mode : DHCP & BOOTP”
#hostname、Port Speed等の場合は“2- Advanced…”
#キーボードで”1″”2″と打てば選択できます。

1.2 IPアドレス/サブネットマスク/デフォルトゲートウェイの設定(上記で[1- Boot Mode : DHCP & BOOTP]を選択)

——- Boot Mode ————————————————————-

1- DHCP & BOOTP
2- DHCP only
3- BOOTP only
4- Manual

– Back, – Refresh
>

#スタティックIPの場合は“4- Manual”です

——- TCP/IP —————————————————————-

Network not started. Currently making a BOOTP request…
———————————————————————–
MAC Address : 00 00 00 00 00 00

* Changes will take effect on logout.

1- System IP : 0.0.0.0
2- Subnet Mask : 0.0.0.0
3- Default Gateway: 0.0.0.0
4- Boot Mode : Manual
5- Advanced…

– Back, – Refresh, – Event Log
>

#IPアドレスの指定
>1
System IP : 192.168.0.1

#サブネットマスクの指定
>2
Subnet Mask : 255.255.255.0

#デフォルトゲートウェイの指定
>3
Default Gateway : 192.168.0.254

#以上で、IPアドレス/サブネットマスク/デフォルトゲートウェイの設定が完了です。

1.3 ホストネームの設定(上記で[5- Advanced…]もしくは[1- TCP/IP]→[2- Advanced…]を選択)
  ※微妙に設定できる項目が違います。下記は[2- Network]→[1- TCP/IP]→[2- Advanced…]の場合です

——- Advanced… ———————————————————–

Currently operating at 100 full-Duplex.

1- Host Name : APC
2- Domain Name : example.com
3- Port Speed : Auto-negotiation

4- Vendor Class : APC
5- Client ID : 00 00 00 00 00 00
6- User Class : SUMX

7- After IP Assignment: Goto DHCP or BOOTP only mode
8- DHCP Cookie Is : Required to accept offer
9- Accept Changes :

– Back, – Refresh, – Event Log
>

変更内容を保存するには、” 9- Accept Changes”を入力して下さい。
保存せずに上記メニューから抜けると、変更内容がリセットされます。

■2. DNSの設定([2- Network]→[2- DNS])

——- DNS ——————————————————————-

1- Primary DNS Server IP : 0.0.0.0
2- Secondary DNS Server IP: 0.0.0.0
3- Reverse DNS Lookup : Disabled
4- Accept Changes :

?- Help, – Back, – Refresh, – Event Log
>

#逆引き(192.168.0.1 → expmple.com)をする場合は[3- Reverse DNS Lookup]を選択してenableにして下さい。

■3. アラートメールの設定([2- Network]→[7- Email])

——- Email —————————————————————–

SMTP Settings Summary
———————————————————————–
SMTP Server : mail.example.com
From Address : address@example.com

Email Recipient Summary
# To Address SMTP Server Generation Format
———————————————————————–
1 address@example.com Local Disabled Long
2 address@example.com Local Disabled Long
3 address@example.com Local Disabled Long
4 address@example.com Local Disabled Long

*DNS is not configured. Email will not work without DNS.

1- SMTP Settings
2- Email Recipient 1
3- Email Recipient 2
4- Email Recipient 3
5- Email Recipient 4

– Back, – Refresh, – Event Log
>

#SMTPサーバの指定は“1- SMTP Settings”
#送信先メールアドレスの指定は“2- Email Recipient 1”以下の4つで指定できます。

■4. ユーザー名/パスワードの変更([3- System]→[1- User Manager])

——- User Manager ———————————————————-

1- Administrator
2- Device Manager User
3- Auto Logout : 3 Minutes
4- Accept Changes :

– Back, – Refresh, – Event Log
>

#WEBの設定で、自動ログアウトの時間を設定する時は“3- Auto Logout”
#Administratorのユーザ名/パスワードの変更は“1- Administrator”

     Enter current Administrator password : ***

     Current Administrator user name : apc

     Enter new Administrator user name
     to skip :

     Enter new Administrator password
     to skip : ****
     Confirm new Administrator password : ****
     Password has been changed successfully.

     Enter new Administrator authentication
     phrase, Minimum 15 characters
     to skip :

    Press to continue…

■5. 時間の変更/NTPサーバの設定([3- System]→[3- Date/Time])

——- Date/Time ————————————————————-

Date : 06/01/2000 Time : 00:24:33
Format : mm/dd/yyyy
DST : Disabled
NTP : Disabled

1- Manual
2- Network Time Protocol (NTP)
3- Update Time Using NTP Now
4- Date Format
5- Daylight Saving Time (DST)

?- Help, – Back, – Refresh, – Event Log
>

#時間を手動で設定する場合は“1- Manual”
#NTPサーバ/オフセットの指定は“2- Network Time Protocol (NTP)”
#NTPサーバで時間を手動で更新する際は“3- Update Time Using NTP Now”

5.2 NTPサーバ/オフセットの指定(“2- Network Time Protocol (NTP)”を選択)

——- Network Time Protocol (NTP) ——————————————-

1- Primary NTP Server : 0.0.0.0
2- Secondary NTP Server : 0.0.0.0
3- GMT Offset (timezone) : -05:00 hours (Eastern Time)
4- Update Frequency (1-8760 hours): 336
5- NTP Client : Disabled
6- Accept Changes :

?- Help, – Back, – Refresh, – Event Log
>

#NTPサーバの指定
>1
Primary NTP Server : ntp.nict.jp

#オフセットの指定
>3
   Available GMT Offsets
   1 – GMT -12 Eniwetok, Kwajalein     17 – GMT +03 Moscow, Baghdad, Riyadh
   2 – GMT -11 Midway Island, Samoa   18 – GMT +03:30 Tehran
   3 – GMT -10 Hawaii               19 – GMT +04 Baku, Tbilisi
   4 – GMT -09 Alaska               20 – GMT +04:30 Kabul
   5 – GMT -08 Pacific Time           21 – GMT +05 Islamabad, Tashkent
   6 – GMT -07 Arizona, Mountain Time   22 – GMT +05:30 Bombay, Calcutta
   7 – GMT -06 Central Time           23 – GMT +05:45 Kathmandu
   8 – GMT -05 Eastern Time          24 – GMT +06 Almaty, Dhaka
   9 – GMT -04 Atlantic Time (Canada)   25 – GMT +06:30 Rangoon
   10 – GMT -03:30 Newfoundland      26 – GMT +07 Bangkok, Hanoi, Jakarta
   11 – GMT -03 Brasilia              27 – GMT +08 Beijing, Hong Kong
   12 – GMT -02 Mid-Atlantic          28 – GMT +09 Osaka, Sapporo, Tokyo
   13 – GMT -01 Azores, Cap Verde Is.   29 – GMT +09:30 Adelaide, Darwin
   14 – GMT 00 Dublin, Lisbon, London   30 – GMT +10 Canberra, Sydney
   15 – GMT +01 Amsterdam, Berlin, Rome 31 – GMT +11 Magadan, Solomon Is.
   16 – GMT +02 Athens, Istanbul, Minsk  32 – GMT +12 Auckland, Wellington

Select GMT Offset from menu : 28

■6. システム情報の確認([3- System]→[7- About System])

    ———————————————————————–
    About System

    Model Number  : AP9619
    Serial Number  : 000000000000
    Manufacture Date : 11/24/2010
    Hardware Revision : A10
    MAC Address    : 00 00 00 00 00 00
    Flash Type    : AMD A29DL322DB

    Press to continue…

    ———————————————————————–
    Module Information

    Description : Smart-UPS & Matrix-UPS APP
    ———————————————————————–
    Name    : sumx      Type    : StatApp
    Version  : 358        Sector  : 16
    Date    : 11/05/2008    Time    : 15:08:57
    CRC16    : 7606

    Description : Network Management Card AOS
    ———————————————————————–
    Name    : aos        Type    : APC OS
    Version  : 361        Sector  : 47
    Date    : 08/13/2008    Time    : 18:49:49
    CRC16    : 51CC

イベントログは、随時”[CTRL]キー + [L]キー”で確認できます。
また、今回の内容には関係ありませんが、サーバ側にはPowerChute network shutdownをインストールしてます。