HP StorageWorks 8/20q(SANbox3810)の設定

HP StorageWorks 8/20q FC スイッチ (AK242A)
http://h10010.www1.hp.com/wwpc/jp/ja/sm/WF06b/12169-304608-3659972-3659972-3659972-3662821-3662825.html
　　※Qlogic SANbox3810のOEMです。

上記SANスイッチのIPアドレスの設定と作業ログです。

■工場出荷状態
IPアドレス　　　　　　　：10.0.0.1/24
デフォルトGWアドレス：10.0.0.254
ユーザ名　　　　　　　　：admin
パスワード　　　　　　　：(無し)

■下記で設定する内容
IPアドレス　　　　　　　：192.168.0.1/24
デフォルトGWアドレス：192.168.0.254

1.ログインします。

Firmware V8.0.4.4.0

switch login: admin
Password:

Establishing connection… Please wait.

*****************************************************
* *
* Command Line Interface SHell (CLISH) *
* *
*****************************************************

SystemDescription HP StorageWorks 8/20q Fibre Channel Switch
HostName
EthIPv4NetworkAddr 10.0.0.1
EthIPv6NetworkAddr 0000::000:0000:0000:0000
MACAddress 00:00:00:00:00:00
WorldWideName 00:00:00:00:00:00:00:00
SerialNumber 0000000000
SymbolicName 8/20q FC Switch
ActiveSWVersion V8.0.4.4.0
ActiveTimestamp Fri Dec 18 19:23:02 2009
POSTStatus Passed
LicensedPorts 8
SwitchMode Full Fabric

This switch supports a dual-stacked IPv4 and IPv6 network connection.
Use the ‘set setup system’ command to change the network settings.
Either IPv4 or IPv6 can be disabled, otherwise the switch will run in
dual-stack mode.

The alarm log is empty.

Warning: Your user account password has not been changed
It is strongly recommended that you do so before proceeding

8/20q FC Switch #>

2.Adminモードになります

8/20q FC Switch #> admin begin
8/20q FC Switch (admin) #>

3.現在の状態(初回なので工場出荷状態)を確認します
　IPアドレス:10.0.0.1、デフォルトゲートウェイは10.0.0.254に設定されてます。

8/20q FC Switch (admin) #> show system

Assigned System Network Information
———————————–
Hostname
EthIPv4NetworkAddress 10.0.0.1
EthIPv6NetworkAddress 0000::000:0000:0000:0000
DNSServer1
DNSSearchList1
IPv4GatewayList1 10.0.0.254
IPv6GatewayList1
NTPServer

4.IPアドレスの設定をします
　対話式で入力することになり、最後に「y」で機器に反映させます。

8/20q FC Switch (admin) #> set setup system ipv4

A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press ‘q’ or ‘Q’ and the ENTER key to do so.

Current Values:
EthIPv4NetworkEnable True
EthIPv4NetworkDiscovery Static
EthIPv4NetworkAddress 10.0.0.1
EthIPv4NetworkMask 255.0.0.0
EthIPv4GatewayAddress 10.0.0.254

New Value (press ENTER to accept current value, ‘q’ to quit, ‘n’ for none):

EthIPv4NetworkEnable (True / False) : True
EthIPv4NetworkDiscovery (1=Static, 2=Bootp, 3=Dhcp, 4=Rarp) : 1
EthIPv4NetworkAddress (dot-notated IP Address) : 192.168.0.1
EthIPv4NetworkMask (dot-notated IP Address) : 255.255.255.0
EthIPv4GatewayAddress (dot-notated IPv4 Address) : 192.168.0.254

Do you want to save and activate this system setup? (y/n): [n] y

System setup saved and activated.

Log Msg: [Sat Jul 03 22:25:36.159 UTC 2010][C][8400.003C][Switch][Network setup is changing – may lose connection – admin being released automatically]